数码之家

标题: 家里的小水滴.刷固件刷废了. [打印本页]
作者: pass_user    时间: 2024-6-9 22:24
标题: 家里的小水滴.刷固件刷废了.
按这个GITHUB的方式刷的.没有串口ROOT密码,用的第二种方式.然后就GG了.能进系统.但是没法绑定APP.串口正常启动报错是U-BOOT,找不到分区,备份分区启动.


下面是正常的串口输出,
  1. U-Boot 2013.07 (Jul 12 2017 - 14:28:47)

  3. Board: ISVP (Ingenic XBurst T20 SoC)
  4. DRAM:  64 MiB
  5. Top of RAM usable for U-Boot at: 84000000
  6. Reserving 442k for U-Boot at: 83f90000
  7. Reserving 32784k for malloc() at: 81f8c000
  8. Reserving 32 Bytes for Board Info at: 81f8bfe0
  9. Reserving 124 Bytes for Global Data at: 81f8bf64
  10. Reserving 128k for boot params() at: 81f6bf64
  11. Stack Pointer at: 81f6bf48
  12. Now running in RAM - U-Boot at: 83f90000
  13. MMC:   msc: 0
  14. the manufacturer c8
  15. SF: Detected GD25Q128

  17. *** Warning - bad CRC, using default environment

  19. In:    serial
  20. Out:   serial
  21. Err:   serial
  22. Net:   Jz4775-9161
  23. the manufacturer c8
  24. SF: Detected GD25Q128

  26. --->probe spend 4 ms
  27. SF: 65536 bytes [url=home.php?mod=space&uid=3057940]@[/url] 0x230000 Read: OK
  28. --->read spend 13 ms
  29. kernel check OK!
  30. SF: 65536 bytes @ 0x3f0000 Read: OK
  31. --->read spend 12 ms
  32. Root check OK!
  33. SF: 65536 bytes @ 0x770000 Read: OK
  34. --->read spend 13 ms
  35. User check OK!
  36. Hit any key to stop autoboot:  1  0
  37. the manufacturer c8
  38. SF: Detected GD25Q128

  40. --->probe spend 4 ms
  41. SF: 2097152 bytes @ 0x40000 Read: OK
  42. --->read spend 305 ms
  43. ## Booting kernel from Legacy Image at 80600000 ...
  44.    Image Name:   Linux-3.10.14
  45.    Image Type:   MIPS Linux Kernel Image (lzma compressed)
  46.    Data Size:    1640834 Bytes = 1.6 MiB
  47.    Load Address: 80010000
  48.    Entry Point:  803b5820
  49.    Verifying Checksum ... OK
  50.    Uncompressing Kernel Image ... OK
复制代码
下面是报错的串口输出.
  1. U-Boot 2013.07 (Jun 13 2018 - 06:30:25)

  3. Board: ISVP (Ingenic XBurst T20 SoC)
  4. DRAM:  64 MiB
  5. Top of RAM usable for U-Boot at: 84000000
  6. Reserving 442k for U-Boot at: 83f90000
  7. Reserving 32784k for malloc() at: 81f8c000
  8. Reserving 32 Bytes for Board Info at: 81f8bfe0
  9. Reserving 124 Bytes for Global Data at: 81f8bf64
  10. Reserving 128k for boot params() at: 81f6bf64
  11. Stack Pointer at: 81f6bf48
  12. Now running in RAM - U-Boot at: 83f90000
  13. MMC:   msc: 0
  14. the manufacturer c8
  15. SF: Detected GD25Q128

  17. *** Warning - bad CRC, using default environment

  19. In:    serial
  20. Out:   serial
  21. Err:   serial
  22. Net:   Jz4775-9161
  23. the manufacturer c8
  24. SF: Detected GD25Q128

  26. --->probe spend 4 ms
  27. SF: 65536 bytes @ 0x230000 Read: OK
  28. --->read spend 13 ms
  29. **********Kernel check fail,boot from backup partition!***********
  30. Hit any key to stop autoboot:  0
  31. the manufacturer c8
  32. SF: Detected GD25Q128

  34. --->probe spend 4 ms
  35. SF: 2097152 bytes @ 0x780000 Read: OK
  36. --->read spend 305 ms
  37. ## Booting kernel from Legacy Image at 80600000 ...
  38.    Image Name:   Linux-3.10.14
  39.    Image Type:   MIPS Linux Kernel Image (lzma compressed)
  40.    Data Size:    1640834 Bytes = 1.6 MiB
  41.    Load Address: 80010000
  42.    Entry Point:  803b5820
  43.    Verifying Checksum ... OK
  44.    Uncompressing Kernel Image ... OK
复制代码


Flash是GD25Q127Cxxxx

已经用编程器换过一个了,用的是CH552那个编程器,好像那个货读写25的不行,新买的片子读写都不对.还是换回原来的了.然后就提示备份分区启动...
作者: ouyangyuye    时间: 2024-6-10 10:22
360小水滴吗？网上看被破译的很多，不敢用。
作者: 52无线    时间: 2024-6-10 11:59
这个为啥要刷呀
作者: pass_user    时间: 2024-6-13 09:43
52无线 发表于 2024-6-10 11:59
这个为啥要刷呀

想刷成内网摄像头,毕竟现在大容量内存卡很便宜~~
作者: pass_user    时间: 2024-6-13 09:44
ouyangyuye 发表于 2024-6-10 10:22
360小水滴吗？网上看被破译的很多，不敢用。

那个破译的早就不能用了,相比反而是大华和海康BUG比较多,特别是集群安装的.



欢迎光临 数码之家 (https://www.mydigit.cn/) Powered by Discuz! X3.4