WR941 V2用TTL线刷不进去了,只有个原厂界面进去还改不了参数

zhangyouyu

折腾了几下,刷了openwrt,然后刷回原厂,有界面但是改不了路由器里面的设置,再刷机无效,感觉好像没写进去一样,不知道各位大神有么有办法:TTL读取到得信息如下:

U-Boot 1.1.4 (Jun 18 2009 - 15:08:27)

AP81 (ar7100) U-boot
DRAM:  
sri
32 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash:  8 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7100_enet_initialize...
No valid address in Flash. Using fixed address
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
Autobooting in 1 seconds## Booting image at bf020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.6.15--LSDK-6.1.1.40 gcc version 3.4.4 #42 Fri Jul 25 18:01:28 CST 2008

flash_size passed from bootloader = 8

CPU revision is: 00019374

Determined physical RAM map:

memory: 02000000 @ 00000000 (usable)

User-defined physical RAM map:

memory: 02000000 @ 00000000 (usable)

Built 1 zonelists

Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/sbin/init mtdparts=ar7100-nor0:
128k(u-boot),
1024k(kernel),
2816k(rootfs),
64k(config),
64k(art)
mem=32M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled

PID hash table entries: 256 (order: 8, 4096 bytes)

Using 200.000 MHz high precision timer.

Console: colour dummy device 80x25

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 29668k/32768k available (1776k kernel code, 3084k reserved, 359k data, 120k init, 0k highmem)

Mount-cache hash table entries: 512

Checking for 'wait' instruction...  available.

NET: Registered protocol family 16

Jumpstart button pressed.

AR7100 GPIOC major 0

squashfs: version 3.3 (2007/10/31) Phillip Lougher

Initializing Cryptographic API

io scheduler noop registered

io scheduler deadline registered

Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled

serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A

RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize

PPP generic driver version 2.4.2

PPP Deflate Compression module registered

PPP BSD Compression module registered

PPP MPPE Compression module registered

NET: Registered protocol family 24

5 cmdlinepart partitions found on MTD device ar7100-nor0

Creating 5 MTD partitions on "ar7100-nor0":

0x00000000-0x00020000 :"u-boot"

0x00020000-0x00120000 :"kernel"

0x00120000-0x003e0000 :"rootfs"

0x003e0000-0x003f0000 :"config"

0x003f0000-0x00400000 : "art"

NET: Registered protocol family 2

IP route cache hash table entries: 512 (order: -1, 2048 bytes)

TCP established hash table entries: 2048 (order: 1, 8192 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

TCP bic registered

NET: Registered protocol family 1

NET: Registered protocol family 17

802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

All bugs added by David S. Miller <davem@redhat.com>

ar7100wdt_init: Registering WDT success

VFS: Mounted root (squashfs filesystem) readonly.

Freeing unused kernel memory: 120k freed


init started:  BusyBox v1.01 (2008.06.30-01:12+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5

ip_conntrack version 2.4 (256 buckets, 5120 max) - 236 bytes per conntrack

flash_id is 0X898912

Now flash open!

Now flash open!
(none) mips #42 Fri Jul 25 18:01:28 CST 2008 (none)

(none) login: device eth0 entered promiscuous mode

br0: port 1(eth0) entering learning state

br0: topology change detected, propagating

br0: port 1(eth0) entering forwarding state

ath_hal: module license 'Proprietary' taints kernel.

ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)

wlan: 0.8.4.2 (Atheros/multi-bss)

ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved

ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved

ath_ahb: 0.9.4.5 (Atheros/multi-bss)

COEXIST is defined.

Howl Revision ID 0xb9 <6>wifi0: Atheros AR9100 WiSoC: mem=0xb80c0000, irq=2

wlan: mac acl policy registered

ieee80211_ioctl_setmode: CHH Mode: 11NGHT40MINUS

ath_set_config: Setting ATH parameter

ath_set_config: Setting ATH parameter

ath_set_config: Setting ATH parameter

ieee80211_ioctl_setparam: CHH Calling ieee80211_open

ieee80211_ioctl_setparam: CHH Calling ieee80211_open

ieee80211_ioctl_setparam: CHH Calling ieee80211_open

ieee80211_ioctl_setparam: CHH Calling ieee80211_open

--AP ar5416InitUserSettings ahp->ah_miscMode 0xc

ar5416Reset Setting CFG 0x10a

Country ie is CN

ar5416StopDmaReceive: dma failed to stop in 10ms

AR_CR=0x00000024

AR_DIAG_SW=0x40000020

--AP ar5416InitUserSettings ahp->ah_miscMode 0xc

ar5416Reset Setting CFG 0x10a

device ath0 entered promiscuous mode

br0: port 2(ath0) entering learning state

br0: topology change detected, propagating

br0: port 2(ath0) entering forwarding state

ath_netdev_stop: The stopping of the running

ar5416StopDmaReceive: dma failed to stop in 10ms

AR_CR=0x00000024

AR_DIAG_SW=0x40000020

br0: port 2(ath0) entering disabled state

ieee80211_ioctl_setparam: CHH Calling ieee80211_open

--AP ar5416InitUserSettings ahp->ah_miscMode 0xc

ar5416Reset Setting CFG 0x10a

Country ie is CN

br0: port 2(ath0) entering learning state

br0: topology change detected, propagating

br0: port 2(ath0) entering forwarding state