|
|
发表于 2022-1-13 12:56:09
|
显示全部楼层
GT812_B-10/14/2>
输入en进入编辑模式
GT812_B-10/14/2(config)#
再输入onu进入onu设置
GT812_B-10/14/2(config-onu-mgt)#
再输入vlan port_isolate 0
#关闭所有的端口隔离
GT812_B-10/14/2(config-onu-mgt)# vlan port_isolate 0
Disable port isolate success.
GT812_B-10/14/2(config-onu-mgt)#
再输入exit回到上一级
GT812_B-10/14/2(config)#
输入save保存
GT812_B-10/14/2(config)#save
Trying to save configuration to flash, please wait...
Preparing data for saving configuration...Done.
Starting writing configuration data to flash...Done.
Configuration file saved to flash successfully.
GT812_B-10/14/2(config)#
再输入reboot重启设备提示要输入Y，就制动重启了。
下面贴上代码，GT812_B-10/14/2(config)#reboot
Are you sure want to reboot switch system? [Y/N]y
?
-----------------------
B O O T L O A D E R
-----------------------
Date : Jun 28 2007 10:12:28
Version : 1.1
Build : 1.19
ZLIB ver : 1.2.3
FLASH size : 4096 KByte (ID: 0x8000)
1st sector : 128 KByte
Last sector: 128 KByte
NVDB over EEPROM
Press <Enter> for MAINTENANCE
........................................................................................
Loading Image#0 (0x20000)
Processed all arugments
Memory setup complete
Processed all arugments
Memory setup complete
Attached TCP/IP interface to uni unit 0
Attaching interface lo0...done
Adding 15724 symbols for standalone.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003
CPU: ARM Integrator - ARM920T (ARM). Processor #0.
Memory Size: 0x1000000. BSP version 1.3/1.
WDB Comm Type: WDB_COMM_NETWORK
WDB: Ready.
->
****************************************************************************
* COPYRIGHT (C) 2000-2007 PMC-SIERRA, INC. ALL RIGHTS RESERVED. *
*--------------------------------------------------------------------------*
* This software embodies materials and concepts which are proprietary and *
* confidential to PMC-Sierra, Inc. PMC-Sierra distributes this software *
* to its customers pursuant to the terms and conditions of the Software *
* License Agreement contained in the text file software.lic that is *
* distributed along with the software. This software can only be utilized *
* if all terms and conditions of the Software License Agreement are *
* accepted. If there are any questions, concerns, or if the *
* Software License Agreement text file, software.lic, is missing please *
* contact PMC-Sierra for assistance. *
****************************************************************************
HW
Device : 6301
Minor version : 1000'
FW (build on Dec 25 2007 at 08:50:30)
Major version : 1
Minor version : 4
Build No. : 2
Maintenance No. : 4
HOST version : 1.5
Firmware supports PAS6201/PAS6301 devices!
PAS6201 FW (VxWorks support: TORNADO) starting.....
======================================
NOTE: XCVR_info : Vcc : 32602, Current : 4153, XCVR_Flag : 1
APP: Configuring UNI-port parameters...success!
PAS6ONU >User_main: UNI link is up
Initializing Operating System Kernel ......
Initialize System Time...Failure
System Current Time:1970- 1- 1- 0- 0- 0
GROS(tm)
Version 1.2(Build 205 on May 19 2015, 11:46:41)
Copyright Limited. All Rights Reserved
System Initializing ......
System is Detecting Hardware Environment
Detecting Chassis Info ...
Chassis Total Slot Num : 1
Chassis Master Slot Num : 1
Chassis Master Slot No 1 : Inserted Master
First BootLoader Version : 1.0.0
Second BootLoader Version : 1.0.0
SWITCH: ********************************
SWITCH: * Scan mode : Auto *
SWITCH: * Device ID : 0x98 *
SWITCH: * Phy Addr : 0x0 *
SWITCH: * Base Reg Addr : 0x0 *
SWITCH: * Num of Ports : 11 *
SWITCH: * CPU Port : 10 *
SWITCH: * Uplink Port : 10 *
SWITCH: ********************************
SWITCH: QuarterDeck has been started.
SWITCH: Master switch BSP init success
Setting GE WAN Port(10)...
Setting CPU Port(10)...
Setting Device ID (1)...
SWITCH: The switch was initialized successfully
SWITCH: Marvell DSDT Release version 2.7a
SWITCH: GW Implementation Version 1.1(Build 41 on May 19 2015, 11:46:41)
Configuring GROS(tm) Modules and Parameters ......
Initializing Remote Procedure Call(RPC) Service ...***
Initializing Switchover Service.....
ASIC Manage System Local Detecting and Initializing ...
APP: IP address is : [192.168.2.66]
APP: Net mask is : [255.255.255.0]
% SYSMSG SLOT 1 : MODULE REGISTERING.
% SYSMSG SLOT 1 : MASTER MODULE PROMOTED TO ACTIVE.
Chassis Hardware Version : 0.1.0
Chassis Manufacture Date : 2015-05-08
Chassis Serial No : GT812S1505101499
Manufacture Date : 2015-05-08
Serial No : GT812S1505101499
Hardware Version : 2.1.1
Reading System Parameters ......
System Base MAC Address : 000fe9.2a69ee
Detecting Chassis Info ...
Chassis Total Slot Num : 1
Chassis Master Slot Num : 1
Chassis Master Slot No 1 : Inserted Master
First BootLoader Version : 1.0.0
Second BootLoader Version : 1.0.0
Initializing Network Service ......
*********************
Initializing CPU Flow Control...Success
Initializing Management Service ......
*****
Initializing SuperVisor Service ......
System is Checking Nvram...Not Existed
% SYSMSG SLOT 1 : DISCOVERING MODULES.
% All Inserted Module is ready, sys discover finished.
% SYSMSG SLOT 1 : ALL MODULES READY.
% SYSMSG SLOT 1 : MASTER ACTIVE MODULE ENABLING.
ASIC Manage System Global Setting ...
Creating Default Vlan Interface ...
Creating Physical Interfaces ...
Loading Startup Config ...
- 100%
############################################################
# #
# Welcome to our GROS. #
# #
# Press Enter to connect and config this system. #
# #
############################################################
Starting Forwarding Service...
Enabling System to Start Forward Packets...
Product Init Done with sysrun
% SYSMSG SLOT 1 : MASTER ACTIVE MODULE RUNNING.
% SYSMSG SLOT 1 : MODULE INIT DONE.
PASONU: Ethernet receive task ready to run!
Port 1(0) shut down due to no power.
Port 3(2) shut down due to no power.
Port 4(3) shut down due to no power.
Port 5(4) shut down due to no power.
Port 6(5) shut down due to no power.
Port 7(6) shut down due to no power.
Port 8(7) shut down due to no power.
Send oam alarm trap failed(96).
############################################################
# #
# Welcome to our GROS. #
# #
# Press Enter to connect and config this system. #
# #
############################################################
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？立即注册
x
|
IP归属地
雷达卡
