ma5626成功更新到312，居然还活着。

木鸟 · 发表于 2019-7-5 14:28:18

爱科技、爱创意、爱折腾、爱极致，我们都是技术控

您需要登录才可以下载或查看，没有账号？立即注册

x

MA5626(config)#display board
{ desc<K>|frameid[/slotid]<S><Length 1-15> }:0
  Command:
      display board 0
  -------------------------------------------------------------------------
  SlotID  BoardName  Status       SubType0 SubType1 Online/Offline
  -------------------------------------------------------------------------
  0    H822EPUB Active_normal  UP2A
  1    H821EPFE Normal
  2
  -------------------------------------------------------------------------
MA5626(config)#display board 0/0
  ---------------------------------------
  Board Name       : H822EPUB
  Board Status       : Active normal
  ---------------------------------------
  Subboard[0]: H831UP2A                      Status: Normal
  ------------------------------------------------------------------------------
  Port  Port  Optic MDI    Speed    Duplex Flow-  Active Link
      Type  Status          (Mbps)             Ctrl State
  ------------------------------------------------------------------------------
   1  GE normal -    auto    auto    off active offline
   2  GE normal -    auto    auto    off active offline
  ------------------------------------------------------------------------------
  Note: For a 1000 M, electrical port in the full-duplex mode, setting MDI to
      any value is invalid
MA5626(config)#display board 0/1
  ---------------------------------------
  Board Name       : H821EPFE
  Board Status       : Normal
  ---------------------------------------
  ------------------------------------------------------------------------------
  Port  Port  Optic MDI    Speed    Duplex Flow-  Active Link
      Type  Status          (Mbps)             Ctrl State
  ------------------------------------------------------------------------------
   1  GE -       auto auto    auto    off active offline
   2  GE -       auto auto_1000  auto_full off active online
   3  GE -       auto auto_1000  auto_full off active online
   4  GE -       auto auto    auto    off active offline
   5  FE -       auto auto    auto    off active offline
   6  FE -       auto auto    auto    off active offline
   7  FE -       auto auto_100 auto_full off active online
   8  FE -       auto auto    auto    off active offline
  ------------------------------------------------------------------------------
  Note: For a 1000 M, electrical port in the full-duplex mode, setting MDI to
      any value is invalid
MA5626(config)#load packetfile tftp 10.10.10.99 MA5620H822Epub_packetfile_all.bin
  The new packet file will overwrite the old one
  Rollback function will be disabled
  Be sure that the system needn't this function
  Are you sure to load new packet file? (y/n)[n]:y
  Load(backup...) begins, please wait and notice the rate of progress  Any
operation such as reboot will cause failure and unpredictable result
MA5626(config)#
  The loading starts
  PARAMETERS :FrameID: 0, SlotID: 0, Position: -1, Load type: Packet file, Load Object: Active control board
  After loading file, you must reboot system to make file take effect
MA5626(config)#port  mode
  Command:
      port  mode
                  ^
  % Incomplete command, the error locates at '^'
MA5626(config)# reboot system
  Please check whether data has saved, the unsaved data will lose if reboot
system, are you sure to reboot system? (y/n)[n]:y
MA5626(config)#
Platform System start ...
Memory Data Bus Test .................pass.
Memory Address Bus Test .................pass.
Press 'Ctrl+T' To Start Memory Complete Test
Trace code : 0x11060A01
Copy from ROM to RAM    ...... OK!
Uncompress from ROM to RAM ...... OK!
System Vfs init...OK
The latest reboot is caused by : others
Copyright (c) 1998 - 2015 by Huawei Technologies Co.,Ltd.
All Rights Reserved.
The last update date of base BIOS B is : Mar  3 2015 19:58:38
===============================================================
BOARD INFORMATION :
CPU: ARM Integrator - ARM1176JF (ARM).  Processor  running at 533Mhz
256M bytes DDRAM, 64M bytes flash memory installed on board
Baudrate of serial channel is 9600bps
Board's LAN IP address is 10.11.104.2
Board's LAN Subnet mask is 255.255.255.0
Board's LAN MAC address is 5C:4C:A9:13:4E:70
===============================================================

System is booting from base BIOS...
Base BIOS version is 116
Press <D> key to stop auto-boot 0
Now system will boot from flash memory.
Last update bios succeed, synchronize data ...OK!
Transferring control to the loaded program...OK!
System Vfs init...OK
System is upgrading database.... start
System is upgrading database.... 3%
System is upgrading database.... 15%
System is upgrading database.... 30%
System is upgrading database.... 45%
System is upgrading database.... 51%
System is upgrading database.... 90%
System is upgrading database.... 91%
System is upgrading database.... 100%
System is upgrading database.... success

Platform System start ...
Memory Data Bus Test .................pass.
Memory Address Bus Test .................pass.
Press 'Ctrl+T' To Start Memory Complete Test
Trace code : 0x11060A02
Copy from ROM to RAM    ...... OK!
Uncompress from ROM to RAM ...... OK!
System Vfs init...OK
The latest reboot is caused by : others
Copyright (c) 1998 - 2015 by Huawei Technologies Co.,Ltd.
All Rights Reserved.
The last update date of base BIOS A is : Mar  3 2015 19:58:38
===============================================================
BOARD INFORMATION :
CPU: ARM Integrator - ARM1176JF (ARM).  Processor  running at 533Mhz
256M bytes DDRAM, 64M bytes flash memory installed on board
Baudrate of serial channel is 9600bps
Board's LAN IP address is 10.11.104.2
Board's LAN Subnet mask is 255.255.255.0
Board's LAN MAC address is 5C:4C:A9:13:4E:70
===============================================================

System is booting from base BIOS...
Base BIOS version is 116
Press <D> key to stop auto-boot 0
Now system will boot from flash memory.
Testing Flash memory...OK!
Select area information : Program Area B ,Data Area B .
Begin to expand program... OK!
Transferring control to the loaded program...OK!
Starting system application init......successfully!
Starting system configuration data init...successfully!

  Press any key to get started
>>User name:root
>>User password:

  Huawei Integrated Access Software (MA5620).
  Copyright(C) Huawei Technologies Co., Ltd. 2002-2012. All rights reserved.

MA5626>
  User root has used a default password. Change the password in time.
MA5626>enable
MA5626#config
MA5626(config)#interface eth 0/1
MA5626(config-if-eth-0/1)#poe ?
---------------------------------------------
  Command of eth Mode:
---------------------------------------------
all                All ports
legacy             Poe legacy state
portid<U><1,8>       Port ID
power-management    PD equipment power-management
temperature-protection
                  Set poe temperature-protection
MA5626(config-if-eth-0/1)#display poe all
  ---------------------------------------------------------------------------
  PortId  PowerSwitch POEStatus PowerMode Priority MaxPower(mW) PowerStatus
  ---------------------------------------------------------------------------
   1  enable    disable signalmode  low          15400 detecting
   2  enable    disable signalmode  low          15400 detecting
   3  enable    disable signalmode  low          15400 detecting
   4  enable    disable signalmode  low          15400 detecting
   5  enable    disable signalmode  low          15400 detecting
   6  enable    disable signalmode  low          15400 detecting
   7  enable    disable signalmode  low          15400 detecting
   8  enable    disable signalmode  low          15400 power_ready
  ---------------------------------------------------------------------------
MA5626(config-if-eth-0/1)#poe 5 enable mode signal priority low max-power 30000
MA5626(config-if-eth-0/1)#poe 6 enable mode signal priority low max-power 30000
MA5626(config-if-eth-0/1)#poe 7 enable mode signal priority low max-power 30000
MA5626(config-if-eth-0/1)#poe 8 enable mode signal priority low max-power 30000
MA5626(config-if-eth-0/1)#display poe all
  ---------------------------------------------------------------------------
  PortId  PowerSwitch POEStatus PowerMode Priority MaxPower(mW) PowerStatus
  ---------------------------------------------------------------------------
   1  enable    disable signalmode  low          15400 detecting
   2  enable    disable signalmode  low          15400 detecting
   3  enable    disable signalmode  low          15400 detecting
   4  enable    disable signalmode  low          15400 detecting
   5  enable    disable signalmode  low          30000 detecting
   6  enable    disable signalmode  low          30000 detecting
   7  enable    disable signalmode  low          30000 detecting
   8  enable    enable signalmode  low          30000 powered
  ---------------------------------------------------------------------------
MA5626>display patch all
  Software Version:MA5626V800R312C00
  SPC200
  SPH219
  HP2118
  ------------------------------------------------------------------------
  Current Patch State:
  ------------------------------------------------------------------------
  Patch Name       Patch State    Delivery    Attribute    Dependency
  ------------------------------------------------------------------------
  SPC200          running       common    cold patch NO
  SPH219          running       common    hot patch    NO
  HP2118          running       common    hot patch    NO
  ------------------------------------------------------------------------
  Total:3
  Patches in the system cannot be rolled back
MA5626>display version
{ <cr>|backplane<K>|frameid/slotid<S><Length 1-15> }:
  Command:
      display version
  VERSION : MA5626V800R312C00
  PATCH : SPC200 SPH219 HP2118
  PRODUCT : MA5626
  Mainboard Running Area Information:
--------------------------------------------
  Current Program Area : Area B
  Current Data Area : Area B
  Program Area A Version : MA562XV800R308C00
  Program Area B Version : MA5620V800R312C00
  Data Area A Version : MA562XV800R308C00
  Data Area B Version : MA5620V800R312C00
--------------------------------------------
  Copyright (c) Huawei Technologies Co., Ltd. 2002-2012 All rights reserved
  Uptime is 0 day(s), 0 hour(s), 19 minute(s), 15 second(s)