|
爱科技、爱创意、爱折腾、爱极致,我们都是技术控
您需要 登录 才可以下载或查看,没有账号?立即注册
x
本帖最后由 digitking 于 2020-5-11 22:13 编辑
【更新1】不接电脑的时候是HOST模式,接u盘可以自动挂载的- # df -h
- Filesystem Size Used Available Use% Mounted on
- /dev/mtdblock2 7.3M 7.3M 0 100% /
- devtmpfs 124.2M 0 124.2M 0% /dev
- <font color="#ff0000">/dev/sda1 7.4G 666.9M 6.8G 9% /tmp/media/sda1</font>
复制代码
废话不多说,
浏览器直接打开 http://ip/telnet.asp
然后重启即可。
我怎么知道的呢?因为我上了ttl啊,不用拆开,背面的4个空就是ttl
附带着启动的日志
- SHMOO VER 1.13
- PKID07DC06011801080000000000001A103F01000000
- S30000197
- 00000F80
- RDLYW0 00000005
- RDENW0 00000030
- RDQSW0
- 0000000000111111111122222222223333333333444444444455555555556666
- 0123456789012345678901234567890123456789012345678901234567890123
- 00 -------------+++++++++++++++++++++X+++++++++++++++++++++--------
- 01 ---------------++++++++++++++++++++X++++++++++++++++++++--------
- 02 ------------++++++++++++++++++++X++++++++++++++++++++-----------
- 03 ------------+++++++++++++++++++++X++++++++++++++++++++----------
- 04 ----------++++++++++++++++++++X+++++++++++++++++++--------------
- 05 ----------+++++++++++++++++++++X+++++++++++++++++++++-----------
- 06 ----------++++++++++++++++++++++X+++++++++++++++++++++----------
- 07 ------------+++++++++++++++++++++X++++++++++++++++++++----------
- 08 ---+++++++++++++++++++++++X++++++++++++++++++++++---------------
- 09 ------++++++++++++++++++++++X++++++++++++++++++++++-------------
- 10 -----+++++++++++++++++++++X+++++++++++++++++++++----------------
- 11 -------++++++++++++++++++++++X+++++++++++++++++++++-------------
- 12 -++++++++++++++++++++++X++++++++++++++++++++++------------------
- 13 ------+++++++++++++++++++++X+++++++++++++++++++++---------------
- 14 ------++++++++++++++++++++++X+++++++++++++++++++++--------------
- 15 ----++++++++++++++++++++++X+++++++++++++++++++++----------------
- PW0
- 0000000000111111111122222222223333333333444444444455555555556666
- 0123456789012345678901234567890123456789012345678901234567890123
- 00 ----------+++++++++++++++++++++++X++++++++++++++++++++++--------
- 01 ------------++++++++++++++++++++++X+++++++++++++++++++++--------
- 02 ----------+++++++++++++++++++++X+++++++++++++++++++++-----------
- 03 ---------++++++++++++++++++++++X++++++++++++++++++++++----------
- 04 ------++++++++++++++++++++++X+++++++++++++++++++++--------------
- 05 --------++++++++++++++++++++++X++++++++++++++++++++++-----------
- 06 --------+++++++++++++++++++++++X++++++++++++++++++++++----------
- 07 --------+++++++++++++++++++++++X++++++++++++++++++++++----------
- 08 ---+++++++++++++++++++++++X++++++++++++++++++++++---------------
- 09 ------+++++++++++++++++++++++X++++++++++++++++++++++------------
- 10 -----+++++++++++++++++++++X+++++++++++++++++++++----------------
- 11 -------++++++++++++++++++++++X+++++++++++++++++++++-------------
- 12 --++++++++++++++++++++++X++++++++++++++++++++++-----------------
- 13 ------++++++++++++++++++++++X+++++++++++++++++++++--------------
- 14 ------++++++++++++++++++++++X++++++++++++++++++++++-------------
- 15 -----++++++++++++++++++++++X++++++++++++++++++++++--------------
- NW0
- 0000000000111111111122222222223333333333444444444455555555556666
- 0123456789012345678901234567890123456789012345678901234567890123
- 00 -------------++++++++++++++++++++++X++++++++++++++++++++++------
- 01 --------------++++++++++++++++++++++X+++++++++++++++++++++------
- 02 ------------+++++++++++++++++++++X++++++++++++++++++++----------
- 03 ------------+++++++++++++++++++++X++++++++++++++++++++----------
- 04 ----------+++++++++++++++++++++X++++++++++++++++++++------------
- 05 ----------++++++++++++++++++++++X+++++++++++++++++++++----------
- 06 -----------+++++++++++++++++++++X+++++++++++++++++++++----------
- 07 ------------+++++++++++++++++++++X+++++++++++++++++++++---------
- 08 ---++++++++++++++++++++++X++++++++++++++++++++++----------------
- 09 -----+++++++++++++++++++++++X++++++++++++++++++++++-------------
- 10 ---++++++++++++++++++++++X+++++++++++++++++++++-----------------
- 11 -------+++++++++++++++++++++X+++++++++++++++++++++--------------
- 12 -++++++++++++++++++++++X++++++++++++++++++++++------------------
- 13 ----++++++++++++++++++++++X++++++++++++++++++++++---------------
- 14 ------++++++++++++++++++++++X+++++++++++++++++++++--------------
- 15 ----++++++++++++++++++++++X+++++++++++++++++++++----------------
- WRDQW0
- 0000000000111111111122222222223333333333444444444455555555556666
- 0123456789012345678901234567890123456789012345678901234567890123
- 00 ++++++++++++++++++++X++++++++++++++++++++--------++++++++++++++-
- 01 +++++++++++++++++++++X++++++++++++++++++++--------+++++++++++++-
- 02 -++++++++++++++++++++X+++++++++++++++++++--------++++++++++++++-
- 03 ++++++++++++++++++++X++++++++++++++++++++-------+++++++++++++++-
- 04 ++++++++++++++++++++X++++++++++++++++++++--------++++++++++++++-
- 05 ++++++++++++++++++++X++++++++++++++++++++-------+++++++++++++++-
- 06 ++++++++++++++++++++X++++++++++++++++++++------+-++++++++++++++-
- 07 ++++++++++++++++++++X+++++++++++++++++++--------+++++++++++++++-
- 08 +++++++++++++++++++X+++++++++++++++++++-------+++++++++++++++++-
- 09 ++++++++++++++++++++X++++++++++++++++++++-------+++++++++++++++-
- 10 +++++++++++++++++++X+++++++++++++++++++------++++++++++++++++++-
- 11 +++++++++++++++++++++X++++++++++++++++++++--------+++++++++++++-
- 12 +++++++++++++++++++X+++++++++++++++++++-------+++++++++++++++++-
- 13 ++++++++++++++++++++X++++++++++++++++++++------++++++++++++++++-
- 14 ++++++++++++++++++++X++++++++++++++++++++-------+++++++++++++++-
- 15 ++++++++++++++++++++X++++++++++++++++++++--------++++++++++++++-
- WRDMW0 00000020
- WRDMW0 00000019
- ADDR
- 0000000000111111111122222222223333333333444444444455555555556666
- 0123456789012345678901234567890123456789012345678901234567890123
- 00 +++++++++++++++S+++++++++++++++X++++++++++++++++++++++++++++++++
- Decompressing...done
- Found a ST compatible (Winbond/NexFlash) serial flash with 256 64KB blocks; total size 16MB
- INIT for HUB&DL ...
- CFE version 6.37.14.93 (r469350) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
- Build Date: 四 7月 16 04:05:47 CST 2015 (jenkins@linux-cloud)
- Copyright (C) 2000-2008 Broadcom Corporation.
- Init Arena
- Init Devs.
- Boot partition size = 262144(0x40000)
- DDR Clock: 800 MHz
- Info: DDR frequency set from clkfreq=1000,*800*
- srab_rreg: [0x2-0x40] => 0x5 (len 1)
- srab_rreg: [0x2-0x30] => 0x53012 (len 4)
- srab_rreg: [0x34-0x0] => 0x63 (len 1)
- srab_rreg: [0x34-0x1] => 0x2 (len 1)
- srab_rreg: [0x5-0x0] => 0x0 (len 1)
- srab_rreg: [0x0-0xb] => 0x6 (len 1)
- srab_rreg: [0x0-0x5d] => 0xa (len 1)
- srab_rreg: [0x0-0xb] => 0x6 (len 1)
- srab_rreg: [0x10-0x0] => 0x40 (len 1)
- srab_rreg: [0x11-0x0] => 0x40 (len 1)
- srab_rreg: [0x12-0x0] => 0x40 (len 1)
- srab_rreg: [0x13-0x0] => 0x40 (len 1)
- srab_rreg: [0x14-0x0] => 0x40 (len 1)
- et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350)
- CPU type 0x0: 1000MHz
- Tot mem: 262144 KBytes
- CFE mem: 0x00F00000 - 0x00FDDDC4 (908740)
- Data: 0x00F523EC - 0x00F528D0 (1252)
- BSS: 0x00F528E0 - 0x00F77DC4 (152804)
- Heap: 0x00F77DC4 - 0x00FDBDC4 (409600)
- Stack: 0x00FDBDC4 - 0x00FDDDC4 (8192)
- Text: 0x00F00000 - 0x00F4703C (290876)
- Boot: 0x00FDE000 - 0x0101E000
- Reloc: I:00000000 - D:00000000
- Device eth0: hwaddr 6C-0B-84-24-75-XX, ipaddr 192.168.1.1, mask 255.255.255.0
- gateway not set, nameserver not set
- Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
- Loading: Failed.
- Could not load :: Timeout occured
- Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
- Loading: ..... 5147680 bytes read
- Entry at 0x00008000
- Closing network.
- Starting program at 0x00008000
- Linux version 2.6.36.4brcmarm (jenkins@linux-cloud) (gcc version 4.5.3 (Buildroot 2012.02) ) #1 SMP PREEMPT Mon Nov 23 11:06:55 CST 2015
- CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7f
- CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- Machine: Northstar Prototype
- Ignoring unrecognised tag 0x00000000
- Memory policy: ECC disabled, Data cache writealloc
- MPCORE found at 19020000
- On node 0 totalpages: 65536
- DMA zone: 256 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 32512 pages, LIFO batch:7
- Normal zone: 4864 pages used for memmap
- Normal zone: 27904 pages, LIFO batch:7
- PERCPU: Embedded 7 pages/cpu @c8215000 s4672 r8192 d15808 u65536
- pcpu-alloc: s4672 r8192 d15808 u65536 alloc=16*4096
- pcpu-alloc: [0] 0 [0] 1
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60416
- Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock2 ro rootfstype=squashfs init=/sbin/preinit debug
- PID hash table entries: 1024 (order: 0, 4096 bytes)
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Memory: 128MB 128MB = 256MB total
- Memory: 254432k/254432k available, 7712k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- DMA : 0xf7e00000 - 0xffe00000 ( 128 MB)
- vmalloc : 0xd0800000 - 0xf0000000 ( 504 MB)
- lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .init : 0xc0008000 - 0xc0040000 ( 224 kB)
- .text : 0xc0040000 - 0xc04b1000 (4548 kB)
- .data : 0xc04cc000 - 0xc04f0c20 ( 148 kB)
- SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- Hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- Verbose stalled-CPUs detection is disabled.
- NR_IRQS:256
- MPCORE GIC init
- External imprecise Data abort at addr=0x0, fsr=0x1c06 ignored.
- MPCORE Global Timer Clock 500000000Hz
- Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- MPCORE Private timer setup CPU0
- Calibrating local timer... 499.815MHz.
- L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
- CPU1: Booted secondary processor
- MPCORE Private timer setup CPU1
- Brought up 2 CPUs
- SMP: Total of 2 processors activated (3997.69 BogoMIPS).
- devtmpfs: initialized
- atomic64 test passed
- NET: Registered protocol family 16
- Found a ST compatible (Winbond/NexFlash) serial flash with 256 64KB blocks; total size 16MB
- CCA UART Clock Config: Sel=1 Ovr=1 Div=48
- CCA UART Clock rate 125000000Hz
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- libata version 3.00 loaded.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Switching to clocksource mpcore_gtimer
- NET: Registered protocol family 2
- IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP reno registered
- UDP hash table entries: 128 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- PCI: CLS 0 bytes, default 32
- PCI: no core
- PCI: no core
- PCI: scanning bus 0
- pci 0000:00:00.0: reg 10: [mem 0x18000000-0x18000fff]
- pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:01.0: reg 10: [mem 0x18001000-0x18001fff]
- pci 0000:00:01.0: reg 14: [mem 0x18002000-0x18002fff]
- pci 0000:00:01.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:02.0: reg 10: [mem 0x1802c000-0x1802cfff]
- pci 0000:00:02.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:03.0: reg 10: [mem 0x18024000-0x18024fff]
- pci 0000:00:03.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:04.0: reg 10: [mem 0x18025000-0x18025fff]
- pci 0000:00:04.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:05.0: reg 10: [mem 0x18026000-0x18026fff]
- pci 0000:00:05.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:06.0: reg 10: [mem 0x18027000-0x18027fff]
- pci 0000:00:06.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:07.0: reg 10: [mem 0x18012000-0x18012fff]
- pci 0000:00:07.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:08.0: reg 10: [mem 0x18013000-0x18013fff]
- pci 0000:00:08.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:09.0: reg 10: [mem 0x18014000-0x18014fff]
- pci 0000:00:09.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0a.0: reg 10: [mem 0x1800b000-0x1800bfff]
- pci 0000:00:0a.0: reg 14: [mem 0x1800c000-0x1800cfff]
- pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0b.0: reg 10: [mem 0x18022000-0x18022fff]
- pci 0000:00:0b.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0b.1: reg 10: [mem 0x18021000-0x18021fff]
- pci 0000:00:0b.1: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0c.0: reg 10: [mem 0x18023000-0x18023fff]
- pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0d.0: reg 10: [mem 0x18020000-0x18020fff]
- pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0e.0: reg 10: [mem 0x1802a000-0x1802afff]
- pci 0000:00:0e.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:0f.0: reg 10: [mem 0x18210000-0x1821ffff]
- pci 0000:00:0f.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:10.0: reg 10: [mem 0x18010000-0x18010fff]
- pci 0000:00:10.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:11.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:12.0: reg 10: [mem 0x18028000-0x18028fff]
- pci 0000:00:12.0: reg 30: [mem 0x00000000-0x000007ff pref]
- pci 0000:00:13.0: reg 10: [mem 0x18029000-0x18029fff]
- pci 0000:00:13.0: reg 30: [mem 0x00000000-0x000007ff pref]
- PCI: Fixing up bus 0
- PCIE1 link=1
- PCIE1 switching to GEN2
- PCIE1 link=1
- pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
- pci 0001:00:00.0: PME# disabled
- PCI: Fixing up bus 0
- PCI: bus0: Fast back to back transfers disabled
- pci 0001:01:00.0: reg 10: [mem 0x08000000-0x08007fff 64bit]
- pci 0001:01:00.0: reg 18: [mem 0x00000000-0x001fffff 64bit]
- pci 0001:01:00.0: supports D1 D2
- pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0001:01:00.0: PME# disabled
- PCI: Fixing up bus 1
- PCI: bus1: Fast back to back transfers disabled
- pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x082fffff]
- pci 0001:01:00.0: BAR 2: assigned [mem 0x08000000-0x081fffff 64bit]
- pci 0001:01:00.0: BAR 2: set to [mem 0x08000000-0x081fffff 64bit] (PCI address [0x8000000-0x81fffff]
- pci 0001:01:00.0: BAR 0: assigned [mem 0x08200000-0x08207fff 64bit]
- pci 0001:01:00.0: BAR 0: set to [mem 0x08200000-0x08207fff 64bit] (PCI address [0x8200000-0x8207fff]
- pci 0001:00:00.0: PCI bridge to [bus 01-01]
- pci 0001:00:00.0: bridge window [io disabled]
- pci 0001:00:00.0: bridge window [mem 0x08000000-0x082fffff]
- pci 0001:00:00.0: bridge window [mem pref disabled]
- PCIE2 link=0
- PCIE3 link=0
- GPIO registered (major=254).
- Kernel gpio ctrl init
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- Registering unionfs 2.5.11 (for 2.6.36.4)
- NTFS driver 2.1.29 [Flags: R/W].
- JFFS2 version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
- fuse init (API version 7.15)
- msgmni has been set to 496
- io scheduler noop registered (default)
- io scheduler deadline registered
- io scheduler cfq registered
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550
- console [ttyS0] enabled
- serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
- brd: module loaded
- loop: module loaded
- pflash: found no supported devices
- bcmsflash: squash filesystem found at block 37
- sflash size is too small to afford two images.
- Creating 5 MTD partitions on "bcmsflash":
- 0x000000000000-0x000000040000 : "boot"
- 0x000000040000-0x000000ff0000 : "linux"
- 0x0000002551c4-0x000000fe0000 : "rootfs"
- 0x000000fe0000-0x000000ff0000 : "bak-nvram"
- 0x000000ff0000-0x000001000000 : "nvram"
- nflash: found no supported devices
- PPP generic driver version 2.4.2
- NET: Registered protocol family 24
- u32 classifier
- Actions configured
- Netfilter messages via NETLINK v0.30.
- nf_conntrack version 0.5.0 (3975 buckets, 15900 max)
- ctnetlink v0.93: registering with nfnetlink.
- xt_time: kernel timezone is -0000
- ip_tables: (C) 2000-2006 Netfilter Core Team
- TCP cubic registered
- NET: Registered protocol family 10
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
- brcmnand: found no supported devices
- VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- devtmpfs: mounted
- Freeing init memory: 224K
- /sbin/hotplug2: No such file or directory
- insmod: ipv6.ko: no module by that name found
- insmod: bcm57xx.ko: no module by that name found
- hotplug detected product: 1d6b/2/206
- hotplug detected product: 1d6b/2/206
- hotplug detected product: 1d6b/1/206
- Hit enter to continue...hotplug detected product: 1d6b/1/206
- hotplug detected product: 5e3/610/4920
- hotplug detected product: 5e3/610/4920
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- linux_overrides = vlan WARNING: console log level set to 1
- eth1: cmd=231: Invalid argument
- eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
- eth1: WLC_SET_VAR(bg_rate): Operation not supported
- eth1: WLC_SET_VAR(a_rate): Operation not supported
- eth1: WLC_SET_VAR(bg_rate): Operation not supported
- eth1: WLC_SET_VAR(a_rate): Operation not supported
- eth1: WLC_SET_VAR(bg_mrate): Operation not supported
- eth1: WLC_SET_VAR(a_mrate): Operation not supported
- eth1: WLC_SET_VAR(bg_mrate): Operation not supported
- eth1: WLC_SET_VAR(a_mrate): Operation not supported
- eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
- eth1: cmd=64: Operation not supported
- eth2: No such device
- ifconfig: No such device
- vlan1: WLC_GET_VAR(cap): Operation not supported
- info, udhcp server (v0.9.8) started
- error, unable to parse 'option domain '
- telnetd: starting
- port: 23; interface: br0; login program: /bin/sh
- telnetd: starting
- port: 23; interface: vlan1; login program: /bin/sh
- killall: hspotap: no process killed
- ### wps_wfi_init(): <wl0_wfi_enable=(null)>WFI is not enabled ###
- BSD is not enabled: 0=0
- info, udhcp client (v0.9.8) started
- vlan1 dhcp
- vlan1: No such process
- Hit enter to continue...connect: Network is unreachable
- Hit enter to continue...debug, Sending select for 192.168.100.64...
- info, Lease of 192.168.100.64 obtained, lease time 7200
- recvfrom: Connection refused
- recvfrom: Connection refused
- recvfrom: Connection refused
- info, udhcp server (v0.9.8) started
- Hit enter to continue...error, unable to parse 'option domain '
- Hit enter to continue...USBSW_MON_BIT is LOW
- Switch to WiFiDock mode!!
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 5e3/610/4920
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 5e3/610/4920
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 5e3/610/4920
- hotplug detected product: 5e3/610/4920
- Set Ethernet P1 link status is down.
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
- hotplug detected product: 17e9/434b/3102
复制代码
还有一些信息
- BusyBox v1.7.2 (2015-11-23 11:08:12 CST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- # ls
- ls lsmod
- # lsmod
- Module Size Used by Tainted: P
- NetUSB 193529 0
- GPL_NetUSB 3955 1 NetUSB
- ohci_hcd 18606 0
- ehci_hcd 35444 0
- wl 4101030 0
- dpsta 2897 1 wl
- et 63533 0
- igs 12935 1 wl
- emf 16330 2 wl,igs
- ctf 17575 0
- #
- # free
- total used free shared buffers
- Mem: 254656 26528 228128 0 1020
- Swap: 0 0 0
- Total: 254656 26528 228128
- #
- #
- # df
- Filesystem 1k-blocks Used Available Use% Mounted on
- /dev/mtdblock2 7424 7424 0 100% /
- devtmpfs 127216 0 127216 0% /dev
- # cd /www
- # cd dynadock/
- # ls *.asp
- basic.asp head.asp internet.asp security.asp telnet.asp
- filter.asp head_w.asp lan.asp setup.asp wan.asp
- firmware.asp index.asp menu.asp ssid.asp wifi.asp
- forward.asp index2.asp radio.asp status.asp
- #
复制代码
不违规,上拆机图
|
打赏
-
查看全部打赏
|