今天无聊翻出了个旧硬盘并修复：Kingston SA400S37/120G

y8160000 · 发表于昨天 17:03

今天在店里无意中翻出了一个硬盘，接电脑测试竟然在BIOS中显示S11

然后到网上去搜了一下，竟然说是要重写固件，按网上操作下载了查询固件信息，显示如下：
---------------------------------------------------------------------------------------------------------------------

v0.73a
Drive: 1(ATA)
Model: SATAFIRM S11
Fw : SBFK71W0
Size : 114473 MB
P/N  : 7688575
Bank00: 0x2c,0xb4,0x78,0x32,0xaa,0x4,0x0,0x0 - Micron TLC 384Gb/CE 384Gb/die
Bank01: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank02: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank03: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank04: 0x2c,0xb4,0x78,0x32,0xaa,0x4,0x0,0x0 - Micron TLC 384Gb/CE 384Gb/die
Bank05: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank06: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank07: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank08: 0x2c,0xb4,0x78,0x32,0xaa,0x4,0x0,0x0 - Micron TLC 384Gb/CE 384Gb/die
Bank09: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank10: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank11: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank12: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank13: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank14: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Bank15: 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff - Micron TLC 384Gb/CE 384Gb/die
Controller : Possible PS3109/11
Flash CE    : 3
PS3105/3108/3109/3111 only:
Flash Channel: 2
Dram Size,MB : 32
PS3110 only  :
Flash Channel: 5
Interleave : 2

----------------------------------------------

由上面信息可以看到版本是SBFK71W0，但在网上就是下载不到这个版本。后来我就下载这个SBFK71F1版本的刷新程序。

使用这个版本竟然也成功了

反正能用，我就没有管它了

按提示重新重启电脑后在磁盘管理器中，能看到了。
重新分区后测试了一下，可以正常读写。。。不知道这样是不是就行了

我自己测试完全没有问题。并没有大批量测试，我手里只有这一个盘。