自己试着开卡，结果都是失败的，不知道怎么回事，请大神帮帮忙！

mtv0506

自己有一个威刚SP900 128G固态硬盘，前段时间看了网上教程弄了下安全擦除，结果不知道是没完成就断电了还是怎么的，突然整个盘就不认了，管理里面用硬盘盒子能发现盘符，但不能格式化，然后自己网上搜索了下想着自己开卡试试看，自己折腾了下，虚拟机装Fedora 14版本，都按照步骤来，网上看有个教程用的是28044.0.driveconfig，固件用的是FW_PPRO_5_2_2_Release.672199.release.0.mfp，终端那些都能发现主控，到了开卡这不就总过不去，都是失败，有没有大神帮忙看下指导下是哪里出问题了，希望大神能帮忙指个方向也行，第一次搞，不太懂感谢！
这个是主控跟闪存颗粒的型号，主控是SF2241 VB2 SPC,颗粒上面是数字600739095300463844   下面还有600738891206474643
终端能发现主控
这里是选择

28044.0.driveconfig吧？

下面这个选择的是

FW_PPRO_5_2_2_Release.672199.release.0.mfp

点开始过一会到大概20%多就失败了
下面的是日志
Starting command:[/mnt/123/genesis/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 8:0:0:0 "/mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp" "/mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/Configuration_Files/28044.0.driveconfig" 123 3  LOG="/mnt/123_localhost.localdomain_DATETIMESTAMP_8.0.0.0_PROCESS_SSD_RESULT.log"   ]...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 02/26/2019 23:08:42] - SF_Genesis has been invoked with the following parameters:
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      argv[1]: -PROCESS_SSD
                      argv[2]: 8:0:0:0
                      argv[3]: /mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
                      argv[4]: /mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/Configuration_Files/28044.0.driveconfig
                      argv[5]: 123
                      argv[6]: 3
                      argv[7]: LOG=/mnt/123_localhost.localdomain_DATETIMESTAMP_8.0.0.0_PROCESS_SSD_RESULT.log
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 02/26/2019 23:08:42] - Instructing the operating system to purge any existing cached data for device: '8:0:0:0'
[Tue 02/26/2019 23:08:47] - Issuing a discovery command for device: '8:0:0:0'
[Tue 02/26/2019 23:08:52] - Discovery command completed...
[Tue 02/26/2019 23:08:52] - Waiting 5 seconds for the system to settle...
[Tue 02/26/2019 23:08:57] - Device designation string '8:0:0:0' is mapped to node '/dev/sg2'
[Tue 02/26/2019 23:08:57] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              DeviceName = /dev/sg2
    MFP Package Filename = /mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
      Configuration File = /mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/Configuration_Files/28044.0.driveconfig
              Serial No. = 123
         World Wide Name = 3
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 02/26/2019 23:08:58] - Successfully received the IDENTIFY data from the drive...
[Tue 02/26/2019 23:08:58] - Validating Manufacturing Firmware Package: /mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Tue 02/26/2019 23:09:01] - Successfully opened the package: /mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Tue 02/26/2019 23:09:01] - file  /mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/Configuration_Files/28044.0.driveconfig Loaded successfully
[Tue 02/26/2019 23:09:15] - Warning:  Unable to query diagnostics information to perform power management settings check
[Tue 02/26/2019 23:09:15] - B01 Power Management configuration request detected
[Tue 02/26/2019 23:09:15] - Successfully extracted *.DriveConfig file: /mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/Configuration_Files/28044.0.driveconfig
[Tue 02/26/2019 23:09:15] - Extracted Config_ID: 1 (28044) in DriveConfig file: /mnt/123/FW_PPRO_5_2_2_Release.672199.release--0/Configuration_Files/28044.0.driveconfig
[Tue 02/26/2019 23:09:15] - Extracted SerialOutputControl: 0
[Tue 02/26/2019 23:09:15] - Searching for flashware image for configuration 28044
[Tue 02/26/2019 23:09:15] - Manifest found for configuration 28044
[Tue 02/26/2019 23:09:15] - Flashware image extracted: 28044_fw_cl_mlc_MIC_64Gb_MT29F128G08CFABBWP_1Q_4C_1D_S_PP_R01358_s512.vic
[Tue 02/26/2019 23:09:15] - Searching for manufacturing image for configuration 28044
[Tue 02/26/2019 23:09:15] - Manifest found for configuration 28044
[Tue 02/26/2019 23:09:15] - Manufacturing image extracted: 28044_mf_mlc_MIC_64Gb_MT29F128G08CFABBWP_1Q_4C_1D_S_PP_R01358_s512.vic
[Tue 02/26/2019 23:09:15] - Proceeding in ROM mode, download feature 3...
[Tue 02/26/2019 23:09:15] - FATAL_ERROR: Could not download MFB to the drive...(0x00100001:SF_SATA_DEVICE_NOT_PRESENT_ERROR)
[Tue 02/26/2019 23:09:15] - End of Genesis manufacturing log.
[Tue 02/26/2019 23:09:15] - Exiting...
[Tue 02/26/2019 23:09:15] - Overall Result for Device: /dev/sg2 ****** FAIL ******

Process exited with code 20

jyobin

我只想知道楼主的开卡教程哪里找到的，我也有一块SP900想重新开卡

13530079674

这个ID应该是28044，开好过

s645s645

20一般都是设备原因，上面提示是SATA设备没有准备好，所以要查下有没有短接，或者换个转接卡试试.我上次自己搬板子就是把一个好板子搞虚焊了，一直提示20代码，你这个是原装盘虚焊的可能性比较小。

fangyinghh

楼主，我的已用28026这个id开好，要不你也试试？

huakun888

楼主如何知道这个颗粒的ID？颗粒都没有测试

fangyinghh

我刚开好一个，给你讲下思路。
先去威刚官网下载该型号ssd的固件升级程序，解开包可以看到升级固件的文件夹里有很多个以一串数字开头的vic文件，这些数字就是威刚使用的开卡id，白片刚用的闪存型号不少，有经验的玩家能一眼看出闪存上数字代表的型号，我等小白就只能一个个穷举了。
将vic文件前的数字逐个添加到lic文件里，注意格式，威刚的签名是158，也改好，删除最后的checksum并重新生成。
用这个lic解dfp包，然后将可能的配置文件修改好，逐个试验，最终有一个是正确的。
高手也可帮忙指点下，闪存上的数字代表的具体型号，有型号就好弄多了

韵风竹

没短接吧？下载失败

jxr8619

5.6.0版本看下呢，是不是Flash死掉了