Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 12/11/2021 14:53:16] - SF_Genesis has been invoked with the following parameters:
[Sat 12/11/2021 14:53:16] - Instructing the operating system to purge any existing cached data for device: '15:0:0:0'
[Sat 12/11/2021 14:53:21] - Issuing a discovery command for device: '15:0:0:0'
[Sat 12/11/2021 14:53:26] - Discovery command completed...
[Sat 12/11/2021 14:53:26] - Waiting 5 seconds for the system to settle...
[Sat 12/11/2021 14:53:31] - Device designation string '15:0:0:0' is mapped to node '/dev/sg2'
[Sat 12/11/2021 14:53:31] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg2
MFP Package Filename = /root/Desktop/sf2281/MFP/FW_PPRO_6_1_8_Release.1115287.release--12345/FW_PPRO_6_1_8_Release.1115287.release.12345.mfp
Configuration File = /root/Desktop/sf2281/Genesis_bd/26576.12345.200GB.driveconfig
Serial No. = 00000000000000
World Wide Name = 00000000000000
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 12/11/2021 14:53:31] - Successfully received the IDENTIFY data from the drive...
[Sat 12/11/2021 14:53:31] - Validating Manufacturing Firmware Package: /root/Desktop/sf2281/MFP/FW_PPRO_6_1_8_Release.1115287.release--12345/FW_PPRO_6_1_8_Release.1115287.release.12345.mfp
[Sat 12/11/2021 14:53:31] - Successfully opened the package: /root/Desktop/sf2281/MFP/FW_PPRO_6_1_8_Release.1115287.release--12345/FW_PPRO_6_1_8_Release.1115287.release.12345.mfp
[Sat 12/11/2021 14:53:31] - file /root/Desktop/sf2281/Genesis_bd/26576.12345.200GB.driveconfig Loaded successfully
[Sat 12/11/2021 14:53:31] - Warning: Unable to query diagnostics information to perform power management settings check
[Sat 12/11/2021 14:53:31] - B01 Power Management configuration request detected
[Sat 12/11/2021 14:53:31] - Successfully extracted *.DriveConfig file: /root/Desktop/sf2281/Genesis_bd/26576.12345.200GB.driveconfig
[Sat 12/11/2021 14:53:31] - Extracted Config_ID: 1 (26576) in DriveConfig file: /root/Desktop/sf2281/Genesis_bd/26576.12345.200GB.driveconfig
[Sat 12/11/2021 14:53:31] - Extracted SerialOutputControl: 0
[Sat 12/11/2021 14:53:31] - Searching for flashware image for configuration 26576
[Sat 12/11/2021 14:53:31] - Manifest found for configuration 26576
[Sat 12/11/2021 14:53:31] - Flashware image extracted: 26576_fw_cl_emlc_Toshiba_64Gb_TH58TEG7E2HBA4C_4Q_2C_1D_PP_R01168_s512.vic
[Sat 12/11/2021 14:53:31] - Searching for manufacturing image for configuration 26576
[Sat 12/11/2021 14:53:31] - Manifest found for configuration 26576
[Sat 12/11/2021 14:53:31] - Manufacturing image extracted: 26576_mf_emlc_Toshiba_64Gb_TH58TEG7E2HBA4C_4Q_2C_1D_PP_R01168_s512.vic
[Sat 12/11/2021 14:53:31] - Proceeding in ROM mode, download feature 3...
[Sat 12/11/2021 14:53:31] - Successfully downloaded MFB to the drive...
[Sat 12/11/2021 14:53:31] - Waiting (5 sec) for the drive to settle...
[Sat 12/11/2021 14:53:36] - Successfully received the IDENTIFY data from the drive...
[Sat 12/11/2021 14:53:36] - Firmware revision reported to be: '618ABBM0'. This indicates MFB download was successful.
[Sat 12/11/2021 14:53:36] - Successfully enabled SMART capabilities...
[Sat 12/11/2021 14:53:38] - Successfully issued a diagnostic unlock...
[Sat 12/11/2021 14:53:40] - Performing the flash test of block 0 (0x0000)...
[Sat 12/11/2021 14:53:43] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 4
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
Total Number of test results: 32
Number of failures: 24
Number of Passed with warnings: 8
No. Passed without warnings: 0
-----------------------------------------------------------------------------