群联清零工具运行失败求助断电再开机只能识别到2MB

leon30285 · 发表于 2026-2-26 21:41:19

爱科技、爱创意、爱折腾、爱极致，我们都是技术控

您需要登录才可以下载或查看，没有账号？立即注册

x

求助论坛大佬，用论坛其他帖子发的Phison PS5012-E12S Firmware ECFM22.6清零工具运行失败，断电再开机只能识别到2MB，重新运行工具显示
[22:17:29] Check Running Mode
[22:17:29] Get Running Mode
[22:17:29] Device Need Running On FW Mode

用Flash ID显示这些信息
Drive    : 2(NVME)
Scsi    : 2
Driver : W10
Model    : NVMe SSD
Fw       : ECRM02.0
Size    : 2 MB [0.0 GB]
LBA Size  : 512
IOCtl: NVME_W10_CMD [0xd0,0x0,0x0,0x0] failed 0x1!
IOCtl: NVME_W10_CMD [0xd2,0x0,0x400,0x80] failed 0x1!
IOCtl: NVME_W10_CMD [0xd0,0x0,0x0,0x0] failed 0x1!
IOCtl: NVME_W10_CMD [0xd2,0x0,0x80,0x90] failed 0x1!
IOCtl: NVME_W10_CMD [0xd0,0x0,0x0,0x0] failed 0x1!
IOCtl: NVME_W10_CMD [0xd2,0x0,0x80,0x90] failed 0x1!
IOCtl: NVME_W10_CMD [0xd0,0x0,0x0,0x0] failed 0x1!
IOCtl: NVME_W10_CMD [0xd2,0x0,0x80,0x190] failed 0x1!
IOCtl: NVME_W10_CMD [0xd0,0x0,0x0,0x0] failed 0x1!
IOCtl: NVME_W10_CMD [0xd2,0x0,0x80,0x190] failed 0x1!
IOCtl: NVME_W10_CMD [0xd0,0x0,0x0,0x0] failed 0x1!
IOCtl: NVME_W10_CMD [0xd2,0x0,0x400,0x80] failed 0x1!
Controller: PS5012-E12 in Rom Mode

接下来应该咋办？